SCU-17
The SCU-17 is a USB interface unit designed to facilitate the connection between a radio transceiver and a computer. This interface is especially useful for radio amateurs who want to use radio control software and digital modes. The SCU-17 acts as a bridge between the radio transceiver and the computer, allowing data and audio transfer. This interface is compatible with many modern transceivers and is widely used in amateur radio operations for digital modes such as FT8, PSK31, RTTY, among others. A radio amateur connects the SCU-17 to his Yaesu transceiver and his computer via the USB port. Using software such as Ham Radio Deluxe or WSJT-X, you can fully control your transceiver and operate in digital modes such as FT8. The unit handles both audio and data, allowing efficient transfer of digital signals and control of equipment without the need for additional settings.
(Note: Yaesu does not produce CAT, SSTV, RTTY or PSK operating software). SCU-17 USB INTERFACE UNIT
Provides CAT communications over USB when the PC does not have an RS-232C port. It has a USB audio system, so TX and RX audio can be accessed via USB cable. It has a two-channel serial USB device and allows various transmission modes and CAT communications. . at the same time . Operates on USB bus power, so no external power supply required. Provides high RF isolation via relays. Front panel TX and RX audio controls. PTT and FSK control monitor LED indicators. Compatible with: FT-450D, FT-817, FT-857D, FT-897, FT-950, FT-2000
Manual in English PDF see here
Kit content- 1 Yaesu interface
- 1 RD232C Cable
- 1 USB type A / USB type B Cable
- 1 MDIN 6 pin Cable
- 2 3.5 mm connectors
