![LDGYACC LDG Cable interface AT100PROII,AT200PRO, Z11PRO, Z-00PLUS, AT897](https://www.locuradigital.com/var/cache/images/318-200/images_upload/ldg.jpg)
Z11PROII LDG automatic antenna coupler 0.1a Power Range 125W (100W 6M) adjustment range 6-1000 Ohms 6M 16-150 Ohms Frequency Range 1.8 to 54 Mhz 16000 memories. ROE and LED status Adjustment time between 0.5 and 6 seconds (less than 0.1 sec more Manufacturer: ldg Reference Z11PROII
Z11PROII LDG Automatic Antenna Coupler
The Z11 coupler was one of LDG's most popular models. The new Z11-Pro it is even better admits 0.1 125W being ideal for its valid use both in QRP and with a standard 100W equipment.
THE Z11-Pro It has 8000 3D memories, where adjustment data and frequencies used are automatically memorized. When you use the coupler on a frequency where it has been previously used, the adjustment is practically instantaneous.
THE Z11-Pro supports up to 125W in SSB and CW from 1.8 to 54Mhz, it can be used with any type of antenna, inverted V dipoles, yaguis, loop,
etc ... Can also be used with long wires and parallel drop antennas with the optional LDG balun.
As a remarkable feature the Z11-Pro It can work with external power supply or with internal BATTERIES (optional), thanks to its low consumption, it can work for several years with 6 batteries size R6, AA, if weight is a determining factor with 3 R6 batteries for 1 year or even several months on a single 9V battery.
Power range 0.1a 125W (100W 6M)
Setting range from 6 to 1000 Ohms
16 to 150 Ohms 6M
Frequency range from 1.8 to 54 Mhz
16000 memories.
SWR and status LED indicator
Adjustment time between 0.5 and 6 seconds
(less than 0.1 second if it is a memory)
Dimensions: 22x15.3x5cmm
Microprocessor controlled
11-16 V
Consumption 300mA, during adjustment (25 uA at rest)
Manual in Spanish