The PWR-TA-36-BNC is a walkie antenna that operates in the VHF-UHF frequency bands. VHF-UHF Operation: This antenna is designed to transmit and receive signals in the VHF (Very High Frequency) and UHF (Ultra High Frequency) frequency bands. These ban more Manufacturer: komunica Reference PWRTA36BNC
The PWR-TA-36-BNC is a walkie antenna that operates in the VHF-UHF frequency bands.
VHF-UHF Operation: This antenna is designed to transmit and receive signals in the VHF (Very High Frequency) and UHF (Ultra High Frequency) frequency bands. These bands are common for radio communications in applications such as amateur radio, emergency services, and others.
RX in Multiple Frequency Bands: The antenna is capable of receiving signals in several frequency bands, including 120 MHz, 150 MHz, 300 MHz, 800 MHz and 900 MHz. This makes it suitable for receiving a wide range of radio signals in different applications.
10W Maximum Power: The antenna is designed to handle a maximum transmit power of up to 10 watts, which is typical for walkie-talkie radios and other portable communication devices.
360 mm (36 cm) length: With a length of 36 centimeters, this antenna is longer than some standard walkie-talkie antennas, which can improve the efficiency of radiation and signal reception, especially in frequency bands higher.
BNC Connector: The antenna is equipped with a BNC connector, which is a common type of radio frequency connector used in radios and other communication devices. This makes it easy to connect the antenna to a compatible device.
PWR-TA-36-BNC is a walkie antenna designed to operate in the VHF and UHF frequency bands. With its ability to receive signals in multiple frequency bands and handle up to 10 watts of power, it is suitable for a variety of amateur radio and general communication applications. Its 36cm length can also be beneficial in improving antenna efficiency at higher frequencies.
