SCU57 Yaesu FT2/FT5DR/3DE/FTM-100/FTM-400 Programming Cable

SCU-57

SCU57 (replaces the old SCU-39) Yaesu FT2/3DE/FTM-100/FTM-400 programming cable. SCU-57 cable set, contains 1x SCU-19, 2 x 3.5mm stereo jack cables (grey, black), 1 x CT-44 adapter
Yaesu SCU-39Yaesu
WiRES-X patch cord kit for configuring a portable digital node station with
FT-5DR-E,FT-2/3 / FTM-400 / FTM-100
After updating the transceiver firmware to the latest version that supports the Portable Digital Node function, the SCU-57 Cable Kit allows the user to easily set up and manage a Portable Wire-X station by directly connecting the FT-2DR to the USB port and to audio. ports of a PC. In this configuration, the HRI-200 Conventional Internet Interface Kit is not required for the portable digital node function and a fixed or dynamic global IP address is not required. Since users do not need to open an Ethernet port, X-wire communication is possible from any location, such as hotel rooms, airports, car Wi-Fi, or even Wi-Fi hotspots.

Using this new portable digital node feature, users can access the X-wire network directly using the PTT and microphone transceivers. The need to have an additional radio to talk to a radio node is no longer necessary to enjoy the X-wire network. With the SCU-57 cable kit, the transceiver can also function as an access point for RF communication identical to any previous Wire-X node.

• Cable length 1 meter
• Usb connector
• Cable with 2 connectors of 1 pins x 3 contacts 2.5 mm
• Cable with 2 connectors of 1 pins x 3 contacts 2.5 mm